 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 66147 40kV HIGH VOLTAGE ISOLATOR WITH BUFFERED OUTPUT Mii OPTOELECTRONIC PRODUCTS DIVISION Features: * * * * 10 Mhz bandwidth typical 40kVdc isolation test voltage TTL compatible input and output High common mode rejection Rugged ceramic package Applications: * * * * * Military and Space Voltage Level Shifting Grid Current Modulator Switching between power supplies Medical systems * DESCRIPTION The 66147 high voltage isolation consisting of a LED optically coupled to a high speed, high gain inverting detector gate. Output is TTL capable with switching propagation delays of 55ns typical, hermetically sealed in TO-46 packages and mounted in a highly reliability, hermetically sealed ceramic package. Available in commercial (0 to +70C), extended temperature range (-40 to +85) and full Military temperature range (-55 to +125C). Contact the factory for special custom or multi-channel requirements! ABSOLUTE MAXIMUM RATINGS Storage Temperature........................................................................................................................................... -65C to +150C Operating Free-Air Temperature Range ............................................................................................................. -55C to +125C Lead Solder Temperature.........................................................................................260C for 10s (1.6mm below seating plane) Peak Forward Input Current ........................................................................................................................ 40mA (1ms duration) Average Forward Input Current ............................................................................................................................................20mA Input Power Dissipation .......................................................................................................................................................35mW Reverse Input Voltage ...............................................................................................................................................................5V Supply voltage - VCC ................................................................................................................................. 7V(1 minute maximum) Output Current - IO ................................................................................................................................................................25mA Output Power Dissipation ....................................................................................................................................................40mW Output Voltage - VO ...................................................................................................................................................................7V Total Power Dissipation .....................................................................................................................................................350mW Package Dimensions Schematic Diagram O0.300 [7.62] O0.018 [0.46] TYP A (BLACK DOT) K GND(RED DOT) CASE Vout Vcc A VCC Vout 3.000 [76.20] GND CASE K 0.500 [12.70] MIN 0.500 [12.70] MIN NOTE: A.01 TO 0.1 F BYPASS CAPACITOR MUST BE CONNECTED BETWEEN Vcc AND GROUND. DIMENSIONS ARE INCHES(MILLIMETERS) NOMINAL MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION * 725 E. Walnut St., Garland, TX 75040 * (972) 272-3571 * Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com 7-7 66147 ELECTRICAL CHARACTERISTICS Ta = 25C unless otherwise specified. 40kV HIGH VOLTAGE ISOLATOR WITH BUFFERED OUTPUT PARAMETER High Level Output Current Low Level Output Voltage High Level Supply Current Low Level Supply Current Input Forward Voltage Input Reverse Breakdown Voltage Input-Output Insulation Leakage Current SYMBOL IOH VOL ICCH ICCL VF BVR II--O MIN TYP 5 0.35 9 13 1.5 MAX 250 0.6 20 30 1.75 10 UNITS A V mA mA V V A TEST CONDITIONS VCC = 5.5V, VO = 5.5V, IF = 20A VCC = 5.5V, IF = 10mA IOL (Sinking) = 10mA VCC = 5.5V, IF = 0 VCC = 5.5V, IF = 20mA IF = 15mA IR = 10A VCC = 40kVdc, Relative Humidity = 45% Ta = 25C, t = 5 sec RL = 510, CL = 15pf. If = 13mA RL = 510, CL = 15pf If = 13mA NOTE 5 Propagation Delay Time To High Output Level Propagation Delay Time To Low Output Level TPLH TPHL 45 55 95 110 ns ns TYPICAL CHARACTERISTICS TA = 25C, VCC = 5V PARAMETER Input Diode Temperature Coefficient Resistance (Input-Output) Input-Input Insulation Leakage Current Resistance (Input-Input) Common Mode Transient Immunity at High Output Level Common Mode Transient Immunity at Low Output Level SYMBOL vF TA MIN TYP -1.9 10 12 MAX UNITS mV/C TEST CONDITIONS IF = 20mA VI--O = 500V Relative Humidity = 45% VI-I = 500V, t = 5s VI-I = 500V VCM = 10V (peak), VO (min) = 2V, RL = 510, IF = OmA VCM = 10V (peak), VO (max) = 0.8V, RL = 510, IF = 1OmA NOTE 1 3 4 4 7 RI-0 II-I RI-I CMH 1000 0.5 10 12 nA 10000 V/s CML 1000 10000 V/s 8 NOTES: 1. Each channel 2. Measured between pins 1 through 8 shorted together and pins 9 through 16 shorted together. 3. Measured between pins 9 and 10 or 11 and 12 shorted together, and pins 9 through 16 shorted together. 4. Measured between pins 9 and 10 shorted together, and pins 11 and 12 shorted together. 5. The tplh propagation delay is measured from the 6.5mA point on the trailing edge of the input pulse to the 1.5V point on the trailing edge of the output pulse. 6. The tphl propagation delay is measured from the 6.5mA point on the leading edge of the input pulse to the 1.5V point on the leading edge of the output pulse. 7. CMh is the max. tolerable common mode transient to assure that the output will remain in a high logic state (i.e. VO > 2.0V). 8. CMl is the max. tolerable common mode transient to assure that the output will remain in a low logic state (i.e. VO < 0.8V). 9. It is essential that a bypass capacitor (.01 to 0.1F ceramic) be connected from pin 1 to pin 4. RECOMMENDED OPERATING CONDITIONS: PARAMETER Input Current, Low Level Each Channel Input Current, High Level Each Channel Supply Voltage Fan Out (TTL Load) Each Channel Operating Temperature PART # 66147-001 66147-102 66147-011 SYMBOL IFL IFH VC N TA -55 MIN 0 12.5 4.5 MAX 250 20 5.5 6 125 C UNITS A Ma V SELECTION GUIDE PART DESCRIPTION Inverted output, military operating range (-55 to +125C) Inverted output, full mil-temp (-55 to +125C) with 100% device screening (on discrete components) Inverted output, commercial version Isolator(0 to 70C) MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION * 725 E. Walnut St., Garland, TX 75040 * (972) 272-3571 * Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com 7-8 |
Price & Availability of 66147-102
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |